GlühkerzeAls Glühkerze wird eine no

GlühkerzeAls Glühkerze wird eine normale 3er bis 5er Kerze eingesetzt. Die Glühwendel muss ca. 3-4mm herausgezogen sein (z.B. mit einer Stecknadel) und hellrot glühen (Die Glühspannung kann ggf. im Limits Menü nachgestellt werden, siehe Seite 42, Standartwert=2,1 ).

結果 (英文) 1:

Glow plug
as glow plug is a standard 3 Series 5 Series used to candle. The filament must be pulled out about 3-4mm (eg with a pin) and bright red glow (the glow voltage can be adjusted in the Limits menu if necessary, see page 42, default value = 2.1).

結果 (英文) 2:

Glow plug
A normal 3-to-5 candle is used as a glow candle. The incandescent coil must be pulled out approx. 3-4mm (e.g. with a pin) and glow bright red (the incandescent voltage can be re-enacted in the Limits menu if necessary, see page 42, standard value=2.1 ).

結果 (英文) 3:

Lamps
A normal 3er to 5er candle is used as a light bulb. The filament valve shall be drawn out approximately 3-4mm (e.g. with a pin) and shall glow bright red (the filament voltage may, if necessary, be used. in the menu limit, see page 42, standard value=2,1.