Failsafe DelayDies ist die Verzöger

Failsafe DelayDies ist die Verzögerungszeit bevor die vorprogrammierte FailsafeRPM eingeleitet wird. Sie ist standardmäßig auf 0,1Sec eingestellt, kann jedoch bis zu 20 Sec ausgedehnt werden.Failsafe TimeoutDies ist die Zeit, bevor die Turbine abgeschaltet wird. (Standardwert = 20 Sec) Sie beginnt mit Ablauf der Zeit Failsafe Delay und kann bis zu 20 Sec ausgedehnt werden. Während dieser Zeit wird die Turbinendrehzahl auf den Parameter Failsafe RPM eingeregelt.Failsafe RPMDies ist die Drehzahleinstellung, in der die Turbine während der Failsafe Timeout Zeit laufen soll. (Standardwert = Leerlaufdrehzahl)

結果 (英文) 1:

Failsafe Delay
This is the delay time before the preprogrammed FailsafeRPM is initiated. By default this is set to 0.1sec, but can be extended up to 20 Sec.
Failsafe Timeout
This is the time before the turbine is switched off. (Default = 20 Sec) It begins with the expiration of the time delay Failsafe and can be extended up to 20 Sec. During this time the turbine speed is adjusted to the parameter Failsafe RPM.
Failsafe RPM
This is the speed setting, in which the turbine is to run time during failsafe timeout. (Default = idle speed)

結果 (英文) 2:

Failsafe Delay
This is the delay time before the pre-programmed FailsafeRPM is initiated. It is set to 0.1Sec by default, but can be extended up to 20 sec.
Failsafe Timeout
This is the time before the turbine is switched off. (default = 20 sec) It starts with the expiration of the time Failsafe Delay and can be extended up to 20 sec. During this time, the turbine speed is adjusted to the Failsafe RPM parameter.
Failsafe RPM
This is the speed setting at which the turbine should run during the failsafe timeout timeout. (default value = idle speed)

結果 (英文) 3:

Failsafe Delay.
This is the delay time before the default default RPM is started. It is set to 0.1Sec by default, but can be extended to 20 Sec.
Failsafe Timeout
This is the time before the turbine is shut down. (Default value = 20 Sec) It starts with the expiration of the time Failsafe Delay and can be extended to 20 Sec. During this time the turbine speed is adjusted to the Failsafe RPM parameter.
Failed RPM
This is the speed setting in which the turbine should run during the default timeout time. (Default value = Empty speed)