Subject * KT01 MFA Entlüftungsleitu

Subject *
KT01 MFA Entlüftungsleitung O-Ring

Description
current status *
Bei den Serienleitungen A246 501 01/03 25 wurde der O-Ring an der Kupplung auf 7.67 X 2.0 umgestellt. AMG und Serienleitungen verwenden die gleiche Kupplung, jedoch mit unterschiedlichen O-Ringen. Forderung aus dem Werk: Vereinheitlichung der O-Ringe, da Undichtheit bei Montage möglich. // VKF erwünscht // Kostenneutral //

Brief description of complete solution *
Umstellung O-Ring der Entlüftungsleitung von 8.5 X 1.8 auf 7.67 X 2.0

結果 (英文) 1:

Subject *. KT01 MFA breather hose O-ring Descriptioncurrent status *. Series lines A246 501 01/03 25 the O-ring on the clutch to 7.67 X 2.0 was converted. However, AMG and serial lines use the same clutch, with different O-rings. Demand from the factory: unification of the O-rings, as leakage at installation possible. VKF desired / / cost-neutral. Letter description of complete solution *. Conversion of O-rings of the breather pipe of 8.5 X 1.8 to 7.67 X 2.0

結果 (英文) 3:

Subject *
KT01 MFA breather pipe O-ring

Description
current status *
Bei the series lines A246 501 01/03 25 was changed over the O-ring at the clutch to 7.67 X 2,0. AMG and series lines use the same clutch, however with different O-rings. Demand from the work: Standardization of the O-rings, there leakage when assembling possible.//VKF desired //cost-neutrally //

Brief description OF complete solution *
Umstellung O-ring of the breather pipe of 8.5 X 1,8 to 7.67 X 2,0