Position des Gasknüppels in % (0-10

Position des Gasknüppels in % (0-100%)Bei erkanntem Failsafe wird oben rechts ein „F“ angezeigtStickPulseGemessene Pulsbreite des Gasschiebers.AuxInp%Position des 3-Stufenschalters in % (0-100%)(falls aktiviert)AuxPulseGemessene Pulsbreite des AUX KanalsAux.PositionPosition des 3-Stufenschalters ( 0, 1, 2 )(falls aktiviert)FailSafe CountZeigt die Anzahl der Failsafes seit dem Einschalten an.FailSafeTimeZeigt die Zeit in Sekunden, in der sich die ECU im Failsafe befand.Alle Parameter

結果 (英文) 1:

Position of the throttle stick in% (0-100%)
is detected When Failsafe top right "F"
Stick Pulse
Measured pulse width of the gas valve.
AuxInp%
position of the 3-position switch in% (0-100%) (if activated)
AuxPulse
measured pulse width of the AUX channel
Aux.Position
position of the 3-position switch (0, 1, 2) (if activated)
FailSafe Count
Indicates the number of failsafes since power on.
FailSafeTime
Shows the time in seconds that the ECU was in the failsafe.
All parameters

結果 (英文) 2:

Position of the gas billet in % (0-100%)
When the failsafe is detected, an "F" is displayed in the upper right corner
StickPulse
Measured pulse width of the gas slider.
AuxInp%
Position of the 3-tap-changer in % (0-100%) (if activated)
AuxPulse
Measured pulse width of the AUX channel
Aux.Position
Position of the 3-tap-changer ( 0, 1, 2 )(if activated)
FailSafe Count
Displays the number of failsafes since powering on.
FailSafeTime
Shows the time, in seconds, that the ECU was in the failsafe.
All parameters

結果 (英文) 3:

Position of gas rod in% (0-100%)
If a failsafe is detected, an "F" is displayed at the top right
Pulse
Measured pulse width of the throttle.
AuxInp%
Position of the 3-step switch in% (0-100%)(if enabled)
AuxPulse
Measured pulse width of the AUX channel
Aux. Position
Position of the 3-step switch (0, 1, 2) (if enabled)
FailSafe Count
Displays the number of failsafes since switching on.
FailSafeTime
Shows the time in seconds when the ECU was in default.
All parameters