Verzögerungszeit bevor die Failsafe

Verzögerungszeit bevor die Failsafe- Funktion aktiviert wird. Während dieser Zeit wir die Turbine auf die zuletzt als korrekt erkannte vom Gasknüppel vorgegebene Drehzahl eingeregelt ( Hold).Bereich = 0.1 bis 20.0 Sekunden.FailSafeTimeOutVerzögerungszeit bevor die Turbine wegen Failsafe ausgeschaltet wird. Während dieser Zeit wir die Turbine auf die nachfolgend einstellbare Failsafe Drehzahl

結果 (英文) 1:

Delay time before the failsafe is enabled. During this time we adjusted the turbine to the last recognized as correct predetermined by throttle stick speed ( Hold).
Range = 0.1 to 20.0 seconds.
FailSafeTimeOut
delay time before the turbine is shut down due to failsafe. During this time we turbine on the adjustable hereinafter Failsafe speed

結果 (英文) 2:

delay time before the Failsafe function is activated. During this time, we adjusted the turbine to the last speed specified as correct by the gas stick .
Range = 0.1 to 20.0 seconds.
FailSafeTimeOut
delay time before the turbine is switched off due to failsafe. During this time we set the turbine to the subsequent adjustable Failsafe speed

結果 (英文) 3:

Delay time before the Failsafe function is activated. During this time we adjusted the turbine to the last speed specified by the gas rod (61664hold).
Range = 0.1 to 20.0 seconds.
FailSafeTimeOut
Delay time before the turbine is switched off due to failure failure. During this time we adjust the turbine to the following default speed