Verzögerung bevor die Pumpenspannun

Verzögerung bevor die Pumpenspannung hochgefahren wird.In diesem Zustand wird die Kraftstoffpumpe für eine Zeit von ca. 2 Sekunden mit konstanter Spannung betrieben. Dies erlaubt der Turbine Drehzahl aufzunehmen, wobei die Kraftstoffpumpe auf niedrigster Stufe eingeschaltet ist. Nach Ablauf von ca.2 Sekunden wird in den nächsten Zustand „Acceler.“ (=Beschleunigen/Hochfahren) gesprungen.Die Glühkerze ist in diesem Zustand ausgeschaltet.Die rote „Pump running“ LED signalisiert, dass die Pumpe eingeschaltet ist.

結果 (英文) 1:

Delay before the pump voltage is raised.
In this state, the fuel pump is operated for a time of about 2 seconds with a constant voltage. This allows to take the turbine speed, the fuel pump is switched on at the lowest level. After a period of about 2 seconds to the next state "Acceler." (= Acceleration / up) is bound.
The glow plug is switched off in this state.
The red "pump running" LED indicates that the pump is turned on.

結果 (英文) 2:

delay before the pump voltage is raised.
In this state, the fuel pump is operated at constant voltage for a time of about 2 seconds. This allows the turbine to record speed, with the fuel pump switched on at the lowest level. After about 2 seconds will be in the next state "Acceler." (=accelerate/start up).
The glow plug is switched off in this state.
The red "pump running" LED indicates that the pump is switched on.

結果 (英文) 3:

Delay before the pump voltage is raised.
In this condition, the fuel pump is operated with constant voltage for a period of approximately two seconds. This allows the turbine to pick up speed, with the fuel pump switched on at the lowest level. After about two seconds, the accelerator jumps into the next state.
The bulb is switched off in this condition.
The red pump running LED signals that the pump is switched on.