• Der Probenein- und -ausbau muss m

• Der Probenein- und -ausbau muss mit erträglichem Aufwand zu realisieren sein.
• Der Druckbehälter muss einem Gasdruck von maximal 100 bar und minimal 10-8 bar bei Temperaturen bis maximal 1.000 °C standhalten und dabei absolut dicht sein.
• Die Versorgung des Messsystems (Heizstrom, Gaszufuhr, Kühlwasser, Messleitungen zum Anschluss der Thermoelemente) muss über geeignete Durchführungen durch die druckdichte Hülle sichergestellt
sein.
• Das Einstellen stationärer Zustände (Temperatur, Gasdruck) muss gewährleistet sein.

結果 (英文) 1:

• Must be sample - and outfitting with bearable effort to realize.• The pressure vessel must be doing absolutely leak-proof and not higher than 100 bar and minimal 10-8 bar at temperatures up to maximum 1,000 ° C withstand a gas pressure.• The supply of the measuring system (heating, gas supply, cooling water, leads to the connection of thermocouples) must have appropriate penetrations through the pressure-tight cover ensuresbe.• Setting stationary conditions (temperature, gas pressure) must be ensured.

結果 (英文) 2:

• The automatic sample and expansion must be achieved with acceptable effort.
• The pressure vessel has a gas pressure of maximum 100 bar and a minimum 10-8 withstand bar at temperatures up to 1,000 ° C, thereby to be absolutely tight.
• The supply of the measuring system (heating, gas supply, cooling water, test leads for connection of thermocouples) must be ensured via suitable passages through the pressure-tight container
to be.
• the adjustment of stationary states (temperature, gas pressure) must be ensured.

結果 (英文) 3:

- the probenein and development must be bearable effort to implement.- the pressure gas pressure of up to 100 bar, and minimal 10 - 8 bar at temperatures up to a maximum of 1000 degrees celsius to be absolutely be closed.- the supply of the measurement system (heizstrom, gas, cooling water, messleitungen for connection of thermocouples) must be appropriate for the druckdichte shell to ensure.- the setting of stationary conditions (temperature, pressure) must be guaranteed.